Page 18 of 48
Air Handling Systems Catalog Home Page
Previous | Next
Couplings, Easy Connect System, End Cap/Plug, & I/O Couplings

Couplings

Small end coupling for connecting pipe to pipe and flexhose to pipe.

Small End Coupling

Large end coupling or short piece of spiral pipe for connecting fitting to fitting.

Large End Coupling

End Cap

End Caps fit over fittings to cap off the end. End Caps can be used to cap round roof openings

End Plug

End Plugs fit into spiral pipe to cap off the end.


Larger sizes available, Please call for quote.

Easy Connect System

Easy Connect Sleeve (ECS) is assembled simply by tightening one allen wrench bolt which will take only a few seconds. ECS's are airtight with no protrusions into the airstream. They are ideal for dust collection systems, which require quick disassembly and reassembly of ductwork, or when a fast labor saving installation is important. Sleeves have polyethylene seal that has sufficient elasticity to accommodate the spiral duct seam. When the connector is tightened the galvanized metal sleeve contacts the duct wall to provide rigidity. No rivets, screws, or sealant are needed to assemble the Easy Connect System.

I/O Couplings

Inside/Outside Couplings have one Small-End which fits inside Spiral Pipe or Metal Flexhose and one Large-End which fits outside Spiral Pipe or Metal flexhose. Many diameters will fit metric collars on woodworking machines. When using I/O Coupling, install in direction of air flow for a smoother inside surface.
Shop Online www.airhand.com

Air Handling Systems - Home Page

If your are interested in ordering any of our products, the process is simple. Just click on Shop Online and select the product(s) you want to buy. It's as easy as that!!!

Should you have any questions, we offer a Frequently Asked Questions section that answers the many questions submitted to us over the years.

If you are interested in obtaining a copy of our guide to designing a system, click on Airhand Designing a System and you can either have us mail it to you or you can download your own copy.

One of our special features is the ability to manufacture custom tees. To find out more information, click on Manufacturing (Custom Parts)

We welcome your questions and comments. If you want to contact us, your can either send us an email at sales@airhand.com or phone us at either: 800.367.3828 or 203.389.9595.
Our fax number is:
800.438.7135 or 203.389.8340

Our company has over 50 years of expertise with a deep commitment of customer service. We are the single source for all your dust & fume collection and industrial ventilation components. You can rely on Air Handling Systems for cost-effective, high quality components. Our technical sales staff is ready to help solve your problems.

CONTENTS

Access Doors30 Angle Rings19 Ball Joints34 Bellmouths34 Blastgates32 Couplings18 Design Information10-13 Duct Silencers33 Easy Connect System18 Elbows22 End Caps / End Plugs18 Extension Arms39 Flexhose40-47 Floorsweeps34 Hangers20-21 Installation Information14 Nozzles35 Offsets27 Radial Saw Hoods34 Reducers31 Spiral Pipe16-17 Stainless Pipe37 Tees27-29 Y Branches29 Transitions35 Up-Blast Stack Caps36
Previous | Next
Air Handling Systems Catalog Home Page
Page 18 of 48
Dust Collection | Ventilation Systems | Dust Control | HVAC Systems & HVAC Ducts | Ducting | Ductwork | Custom Manifold
Industrial Ventilation | HVAC System Ducting | Spray Booth Fume Control