Page 20 of 48
Air Handling Systems Catalog Home Page
Previous | Next
Cost-effective Hanging Solution, Light Duty Make-A-Hanger, & Heavy Duty Make-A-Hanger

Cost-effective Hanging Solution

DYNA-TITE CABLE LOCK is a hanging solution for spiral pipe. The newest fastest and most reliable way to secure equipment, reducing installation labor. A fast, strong, lightweight solution, that the installer can position vertically or at an angle to the suspended object. The anti-corrosion housing has a stainless steel spring that holds the serrated teeth locking wedges against the 3/16 galvanized wire rope. There is a cable release pin for easy adjustment after installation. The working weight load limit per 3/16 wire rope and Cable Lock is 640 lbs. with a 5 to 1 safety factor before breaking. These specifications apply only to Duro-Dyne/Cooper-Campbell Cable.

Light Duty Make-A-Hanger

Easily make your own hangers from our Light Duty Hanger Strapping a 25-foot roll made of 20 gauge galvanized steel, ¾" wide. Hanger strap contains continuous perforated holes for easy bolting and/or nailing were needed. Locate hanger every 10 feet. Recommended for hanging 22-gauge spiral pipe up to 6" in diameter. Simply cut strip to length, leaving enough material to hang from ceiling or attach to wall. Form by hand to desired pipe size. You can get up to six hangers per roll depending on your cut length.

Heavy Duty Make-A-Hanger

Convenient strap for hanging ductwork. 100-foot roll of heavy 16-gauge galvanized steel hanger strapping, 1" wide. Convenient carrying handle in box makes it easy to dispense. Perfect for small to large installations. No wasted material. Weight per box 22 lbs. Easily shipped by UPS. To install cut to length, locate and drill hole for hanging.
100-foot Coil
Easy to carry box
Footer Statement

Air Handling Systems - Home Page

If your are interested in ordering any of our products, the process is simple. Just click on Shop Online and select the product(s) you want to buy. It's as easy as that!!!

Should you have any questions, we offer a Frequently Asked Questions section that answers the many questions submitted to us over the years.

If you are interested in obtaining a copy of our guide to designing a system, click on Airhand Designing a System and you can either have us mail it to you or you can download your own copy.

One of our special features is the ability to manufacture custom tees. To find out more information, click on Manufacturing (Custom Parts)

We welcome your questions and comments. If you want to contact us, your can either send us an email at sales@airhand.com or phone us at either: 800.367.3828 or 203.389.9595.
Our fax number is:
800.438.7135 or 203.389.8340

Our company has over 50 years of expertise with a deep commitment of customer service. We are the single source for all your dust & fume collection and industrial ventilation components. You can rely on Air Handling Systems for cost-effective, high quality components. Our technical sales staff is ready to help solve your problems.

CONTENTS

Access Doors30 Angle Rings19 Ball Joints34 Bellmouths34 Blastgates32 Couplings18 Design Information10-13 Duct Silencers33 Easy Connect System18 Elbows22 End Caps / End Plugs18 Extension Arms39 Flexhose40-47 Floorsweeps34 Hangers20-21 Installation Information14 Nozzles35 Offsets27 Radial Saw Hoods34 Reducers31 Spiral Pipe16-17 Stainless Pipe37 Tees27-29 Y Branches29 Transitions35 Up-Blast Stack Caps36
Previous | Next
Air Handling Systems Catalog Home Page
Page 20 of 48
Dust Collection | Ventilation Systems | Dust Control | HVAC Systems & HVAC Ducts | Ducting | Ductwork | Custom Manifold
Industrial Ventilation | HVAC System Ducting | Spray Booth Fume Control